光学波导中原子干涉的加速度测量

提出一种水平方向、光学波导中原子干涉的加速度测量方案。详细介绍了光路结构、原子团制备以及光学波导的绝热装载等。通过实验手段对测量方案进行验证,首先将~(87)Rb原子团冷却至50 nK的玻色爱因斯坦凝聚态,随后对超冷原子团施加布拉格光进行分束、合束,完成原子干涉过程。实验结果显示,所提干涉测量系统能够实现单轴加速度测量,对未来高精度多轴加速度测量系统的研制具有指导借鉴意义。     

A balancing problem for mixed model assembly lines with a paced moving conveyor

We state a balancing problem for mixed model assembly lines with a paced moving conveyor as: Given the daily assembling sequence of the models, the tasks of each model, the precedence relations among the tasks, and the operations parameters of the assembly line, assign the tasks of the models to the workstations so as to minimize the total overload time. Several characteristics of the problem are investigated. A line‐balancing heuristic is proposed based on a lower bound of the total overload time. A practical procedure is provided for estimating the deviation of any given line‐balance solution from the theoretical optimum. Numerical examples are given to illustrate the methodology. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

高性能微处理器TLB的优化设计

虚拟存储是现代微处理器系统必不可少的存储模式。在虚存模式下,虚拟地址到物理地址的变换是流水线中最频繁的核心服务,容易处于决定处理器时钟周期的关键路径上。为加快虚存的访问,现代高性能微处理器实现了一种硬件地址映射结构:转换后援缓冲器(简称TLB);在分析TLB传统的地址映射机制的基础上,提出了基于虚区域和Cache块标记的预验证技术,结果表明该技术优化了TLB的设计,避免了TLB访问时延成为访存的瓶颈。     

气压/自由陀螺组合式高度控制系统研究

提出一种组合式控制方案。通过选择高度差信号和姿态角及其变化率作为控制规律,较好地抑制了高度控制回路的综合干扰,仿真结果表明,采用上述高度控制方案并用随机射线法优化控制参数,可以提高控制系统抗干扰能力。     

一种新型内曲线式径向柱塞泵的设计

讨论了各种液压泵的使用特点,提出了一种新型内曲线式径向柱塞泵的设计思路.通过合理设计泵内定子内曲线表面,在理论上实现了无流量脉动;为了提高柱塞泵的使用寿命,采取了降低定子导轨压力角的措施;通过Matlab实现了定子表面曲线和压力角的仿真计算;理论分析的结果对于设计和制造低噪声的柱塞式液压泵有一定的指导意义.     

基于多媒体辅助的高等数学教学模式探究

在对高等数学教学模式构建的理论基础和价值取向分析的基础上,确立了"双主-双线"的教学模式:即在高等数学教学中,发挥教师主要导向作用,体现学生自主学习的主体地位,以师生共同探究、学生自主建构为主线,以现代多媒体和传统媒体的灵活运用为辅线的教学模式.并以此为基础陈述了模式的实施步骤及遵循的原则.     

新型树状分形超宽带天线的设计

提出了一种新型树状分形超宽带天线。采用共面波导馈电,通过加载分形缝隙,使天线的阻抗带宽大幅提高。给出了天线回波损耗、方向图和增益结果。对2阶分形天线进行了加工与测试。测试结果表明,天线带宽达到3.5～8GHz,相对带宽为70%。仿真结果与测试结果基本吻合,为超宽带小型化天线的设计提供了新的思路。     

基于RBF神经网络的直接自适应飞行控制器

设计了一种径向基神经网络(RBF NN)飞行控制器结构,并给出了相应的控制律和参数调节律。由于调节了RBF NN的全部参数(连接权、高斯函数的中心和宽度),得到了很好的控制性能。以F8战斗机为控制对象进行了仿真分析,仿真表明,在存在70%的模型误差的情况下,该控制器仍然能实现较好的跟踪控制,表现出很好的鲁棒性,远远优于传统的只调节连接权值的算法。     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

液体火箭发动机基于神经网络的实时故障检测算法实现

以某大型液体火箭发动机为研究对象,针对其启动和稳态工作过程,利用Matlab和Lab Windows/CVI等编程工具,基于神经网络技术,开发实现了其地面试车过程实时故障检测的BP(Back Propagation)和RBF(Radial Basis Function)算法。多次试车数据离线检验和实时在线考核结果均表明该方法能够及时、有效地检测出发动机工作过程中的故障,没有出现误报警和漏报警,并能够很好地满足现场试车的实时性和鲁棒性等要求。